Parts

This illuminated Porsche sign consists of seven individual letters spelling the company name. They have metal enclosures, translucent red panels, internal LED illumination, and 120-volt wiring. Each letter measures approximately 24″ wide by 12″ tall, and the sign spans approximately 16.5′ when arranged as shown.

These four 15″ knock-off wheels measure 6″ in width and were produced by Kelsey-Hayes for use on C2 Chevrolet Corvettes. They feature radial fins and bright center cones, and manufacturing marks indicate the K-H symbol, part numbers, and production stampings. The seller shares that these Kelsey-Hayes wheels were removed from a car in the late…

The seller acquired these Jim Inglése cast aluminum components and Weber carburetors with the purchase of a car in 2015, and the setup was subsequently refurbished. Intended for a General Motors SBC V8, the collection includes an eight-stack intake manifold, four Weber 48 IDA two-barrel carburetors, a set of polished stack screens, and a set of…

This Defender 110 chassis, drivetrain, and parts collection was assembled by the seller circa 2019 for the purpose of modifying an earlier Land Rover Defender 110 in the style of a Defender Puma. A 5.0-liter Coyote V8 is mounted to the galvanized frame along with a Tremec TR6060 six-speed manual transmission, ARB locking front and rear…

This Snap-on tool trolley is #2,001 of 4,200 produced to commemorate Dale Earnhardt’s participation in NASCAR. The wheeled base and top chest have a black finish accented by red recessed areas, stainless-steel trim, and Dale Earnhardt and Chevrolet Lumina graphics. Purchased new by the seller in 2001, this tool trolley is now offered at no…

This four-volume Porsche 911 workshop manual set focuses on models produced from 1972 through 1980, including 911, 911S, 911T, Carrera 2.7, Carrera 3.0, 911SC, and 930 Turbo models. A CIS Troubleshooting Guide, a 1976/1977 technical specifications pocket booklet, and four other Porsche repair manuals are included.

This go-kart was built in 1991 by Power Wheels of Fort Wayne, Indiana, designed to resemble a Porsche 911 Turbo cabriolet, and acquired by the seller in 2024. The car features fiberglass bodywork finished in white over a tubular steel frame, and power comes from a direct-drive 18-volt electric motor with two forward speeds and reverse.

This scale model depicts a Ferrari SF-26 from the 2026 Formula 1 season. The fiberglass replica wears a red livery with a white accent and features front and rear wings, Pirelli-branded tires, a cockpit halo, and a multifunction steering wheel. This SF-26-style display model is offered by a BaT Local Partner at no reserve in Parsippany, New…

This collection includes Alfa Romeo spare parts catalogs for 1750-series and 2000-series cars. The manuals are organized by vehicle system and include technical drawings, charts, and overviews related to various components, including body, chassis, electrics, and powertrain systems. These Alfa Romeo manuals were acquired by the seller in 2016 and…

These beige-leather-upholstered Recaro seats were removed from a 964-generation 911, per the seller. The left seat has control buttons for eight-way power adjustments, and the right seat has buttons for four-way power adjustments. Both seats retain mounting brackets, sliding rails, and adjustment motors.

This removable steel hardtop is from a Mercedes-Benz 190SL, and it is finished in black with a tan headliner. Features include bright trim, a small rear window, and drip rails surrounding the window openings. The top is offered by a BaT Local Partner at no reserve in North Salem, New York. The top has bright trim and drip rails.

This illuminated Pagani sign measures approximately 72” wide by 12” tall and displays the company name and logo. The piece features mirror-finished plastic letters on an oval-shaped silver background and internal illumination powered by 120-volt electricity. Acquired by the seller in 2018, this Pagani sign is now offered at no reserve in…

These 19″ TechArt Formula II wheels were used on the seller's 2002 Porsche 911 Turbo. The front wheels measure 8.5″ in width and have a 48mm offset, while the rears are 11″ wide and have a 52mm offset. The two-piece, five-spoke wheels were acquired by the seller in 2023 and are now offered at no reserve in Bellingham, Washington.

This Ferrari engine is from a US-specification 1969 Ferrari 365 GT 2+2, chassis 12697, that the seller notes was written off in the 1980s. Richard “Dick” DeBiasse of Dark Horse Motors acquired the engine for his collection thereafter. An induction setup consisting of Weber 40 DFI carburetors, linkages, fuel rails, and intake manifolds is…

This Snap-on tool trolley is a Mopar Edition from the Muscle Car Series; the seller notes it is one of 300 examples. The wheeled base and top chest have a purple finish accented by Super Bee and 426 Hemi badges, Muscle Car and Mopar decals, and stainless-steel trim. Purchased new by the seller in 2005, this tool trolley is now offered at no…

This two-piece Gulf collection is comprised of a Gulf script sign with dark blue porcelain enamel-finished letters on a white raceway frame, as well as a single-sided illuminated Gulf sign with an embossed translucent panel. Both pieces have pre-drilled hanging provisions, and the embossed sign has internal fluorescent bulbs using 120-volt…

The seller’s great-uncle purchased this B.G.W. TR-3075 Tri-Rod new in the early 1970s, and the seller retrieved it from his uncle’s barn in 2018 before subsequently completing a restoration. The trike is powered by an 8-hp Briggs & Stratton four-stroke single paired with a Comet Clutches continuously variable transmission.

This Porsche 741 four-speed manual transaxle is a single-mount unit that was removed from a Porsche 356B T5 in 1985. It has since been disassembled, cleaned, inspected, and reassembled. Acquired by the seller in 2016, this Type 741 gearbox is now offered at no reserve in Vidalia, Georgia. Earlier versions of Porsche’s 741 gearbox used a…

This 2015 Aerovault Mk II is a double-axle vehicle trailer that features aluminum body panels and a white fiberglass roof and fenders. It utilizes a rectangular tubed frame and is equipped with a fully-skinned underside, 15″ wheels, electric drum brakes, LED exterior lighting, diamond-plate flooring, and locking dual side doors.

This four-piece collection of Ferrari memorabilia has been with the seller since 2021 and includes a Girard-Perregaux Ferrari watch, an Arno XI Hydroplane scale model, an F1 scale model, and a copy of Ferrari: 25 Years of Calendar Images by Günther Raupp. The lot is offered at no reserve in Fort Lauderdale, Florida.

This reproduction casting of a straight-eight sustained cylinder bore damage during the machining process, prompting its use as the centerpiece of a coffee table. A water pump that was damaged on a different engine, as well as side covers, were added. An extruded aluminum frame with brackets to support the oval glass tabletop was constructed for…

Speedline manufactured these factory center-lock Ferrari F50 wheels. The fronts measure 18×8.5″ and have a 34.85mm offset, and the 18×13″ rears have a -2.5mm offset. Part numbers and other production marks are photographed in the gallery below. Acquired by the seller in May 2026, these wheels are now offered at no reserve in Davenport,…

This 1:1 scale model depicts the McLaren MP4/4 car driven to a World Driver’s Championship title by Ayrton Senna during the 1988 Formula One season. The piece was constructed for the seller in South America using fiberglass, and it wears a white and red #12 livery. Features include front and rear wings, faux suspension components, and fiberglass…

These two 15×5.5” Borrani RW3591 wire wheels fit the Ferrari 250 GTE 2+2, 250 GT Series 2, and 400 Superamerica Series 1/2, per the seller. Both have 72 spokes and a splined hub. The wheels are now offered at no reserve in Ridgefield, Connecticut. Both wheels measure 15×5.5″ wide and are stamped with the model number RW3591.

This single-sided Volkswagen sign was acquired by the seller in June 2026. The original sign, manual, and trim ring were retained, and a metal enclosure, LED bulbs and wiring, and a French mounting cleat were added in preparation for the sale. The sign measures over 5.5' in diameter. This illuminated Volkswagen sign is now offered at no reserve in…

These four 16″ Fuchs 951 wheels measure 7″ and 8″ in width and feature forged construction with anodized lips as well as black-painted centers. Removed from a 1986 Porsche 944 Turbo, the wheels have manufacturing marks indicating production dates and sizing and offset information, Porsche part numbers, and manufacturer logos.

These 18″ magnesium alloy wheels were manufactured by Speedline in Italy, and were removed from a Ferrari F355. Each wheel is finished in silver, has a rubber hub isolator ring, and a prancing horse center cap. Casting marks inside the wheels indicate part numbers, date codes, and sizing information.

This neon Plymouth 'Cuda sign is a single-sided reproduction piece displaying a stylized barracuda illuminated in multi-colored neon tubing. The sign measures approximately 42.5" wide by 31.5″ tall and has 120-volt circuitry. The metal frame is finished in black with pre-drilled mounting tabs, and the power cords have inline switches.

In 2023, the seller sourced this pair of 1959 Cadillac sedan tail fins to reimagine them as freestanding displays. Work consisted of removing Series 62-style side trim, after which the fins were sandblasted and repainted in red single-stage urethane. Reproduction Eldorado-style trim, replacement reflectors, and taillight lenses were added, and…

These 16″ Fuchs wheels measure 7″ and 9″ in width and were produced for use on 930-generation Porsche 911 Turbos and have since been refinished with chrome accents and black recessed areas. The wheels feature forged-alloy construction, and manufacturing marks on the inside of the wheels indicate part numbers and sizing.

This illuminated Greyhound Lines sign is a single-sided piece that was said to have been used at a Dallas-Fort Worth Greyhound station and acquired by the seller earlier this year. The sign displays the company’s logo in red, white, blue, and black on a translucent panel. The piece uses internal 120-volt fluorescent fixtures, has a…

This coffee table was constructed in Italy from a Ferrari engine, and portions of the assembly were cut away to reveal the internal components. Details include a red-and-silver color scheme and a glass tabletop. This Ferrari V12 coffee table is offered at no reserve in Napa, California. Internal components, including pistons, connecting…

This illuminated Sunoco sign measures approximately 9 feet wide and displays the company name against a yellow background and a red arrow. The sign is composed of translucent faces set within a metal enclosure that features mounting provisions. Internal fluorescent bulbs are powered by a 120-volt power cord.

This 1:1-scale model was built to resemble a #16 Ferrari SF Formula One car driven by Charles Leclerc and features fiberglass construction. It wears a red, white, and yellow livery and features red-finished wheels, rubber racing slicks, a Sparco-style harness, and an F1-style steering wheel. This SF-style display model is now offered in Bourbon,…

This Porsche 2.0-liter flat-six is a 901/01 engine that was removed from a 1965 911 and has been with the seller since 2022. Weber carburetors are topped by air filters, and the engine is also equipped with ignition components, a fan, tins, and a muffler. The seller describes the engine as a good core needing a full rebuild, and the early 911…

This pinball machine is one of approximately 3,500 NASCAR-themed arcade games produced by Stern Pinball of Melrose Park, Illinois, and it has been rethemed with a Talladega Nights: The Ballad of Ricky Bobby translight. Custom audio to fit the theme was also added, LED lighting was installed, and the playfield was cleaned in preparation for the…

This children’s ride has been refurbished to resemble a race car with a Ramsey Ford livery. The ride features white fiberglass bodywork with #1 race numbers atop a metal frame, and motion is provided by an electric motor. Additional features include a blue molded seat, a black steering wheel, faux lights, a speaker system, and a 120-volt power…

This sofa was completed by the seller in 2026 and was designed to emulate the rear body section and trim components of a 1955 Chevrolet Bel Air. The red fiberglass bodywork is accented by illuminated tail lights, polished trim, and a smoothie-style chrome bumper.

This coffee table was constructed using a Chevrolet EcoTec3 L83 V8 engine block and a rectangular glass tabletop supported by four pistons. A lamp constructed of automotive parts is also included. This coffee table and lamp are now offered by a BaT Local Partner at no reserve in Santa Rosa, California.

These 15″ Fuchs wheels measure 8″ and 9″ in width and were said to be produced for use on early 930-generation Porsche 911 Turbos. The wheels feature forged-alloy construction, a five-spoke design, and are finished in black with anodized lips. Casting marks inside the wheels indicate part numbers, production dates, and sizing.

These 20″ and 21″ wheels measure 10″ and 13″ in width, respectively, and were produced by Carbon Revolution in Australia for use on C8-generation Chevrolet Corvette Z06s. The wheels feature carbon-fiber construction, a five-spoke design, and an exposed carbon-fiber finish. This set of wheels was acquired by the seller in 2025, is wrapped…

This sign measures 50” tall by 32” wide and is constructed with 220-volt fluorescent fixtures within a metal frame housing a two-piece translucent front panel. Acquired by the seller in Italy, this sign is now offered at no reserve in Boca Raton, Florida. A red stripe underlines the upper panel, which is black with a yellow logo and…

This illuminated single-sided Chevron sign features the red and blue company logo below black company script on an embossed white translucent background. The piece was acquired by the selling dealer circa 2021, and LED fixtures using 120-volt circuitry were retrofitted, along with a replacement power cord with an inline switch.

The seller of this Type 914 side-shift manual transaxle states that it was used for approximately 500 miles in an SBC V8-powered Porsche 914 after it was rebuilt. The package includes a stage 2 Kevlar clutch, a pressure plate, 930/Carrera axles, Patrick Motorsports USA axle adapters, a Kennedy adapter plate, a CNS billet transaxle plate, a…

These four 18″ wheels were manufactured for Ferrari by Speedline in Italy. The multi-piece wheels are mounted with Michelin Pilot Super Sport tires, and the set was removed from a Ferrari 550 Maranello. Each wheel has a five-spoke design; the fronts measure 8.5″ in width, and the rears measure 10.5″ in width.

This illuminated Ford GT sign is a reproduction piece that measures approximately 108″ wide across two components. Features include blue and white lettering, internal 120-volt LED illumination, an on/off toggle switch on the side, and a power cord with a US-style wall plug. This illuminated Ford GT sign is now offered at no reserve in New…

These wheels were on a 1982 Porsche 911SC that the seller purchased over a year ago. There are three forged Fuchs wheels: a 16×6″ front wheel and two 16×7″ rear wheels. The fourth wheel is an aftermarket unit made in China; it measures 16×7″ and was used on the front axle of the seller's car.

This 3.0-liter flat-six engine was produced for use in a 1978 Porsche 911SC and rebuilt by Eurosport Porsche Road and Race of Bensenville, Illinois, in June 2023 before it was reinstalled in the 911SC for around 5,000 miles. The engine and attached five-speed manual Type 915/61 transaxle were removed following an accident, per the seller.

This Bug Stinger go-kart was purchased by the seller on BaT in April 2026, and subsequent work included rebuilding the West Bend 820 two-stroke single, fitting a replacement Max-Torque centrifugal clutch with a custom support bearing, rubber seat frame mounts, an aluminum seat-back fuel tank, mounting GoPower wheels and slick tires, refinishing…

This collection of Porsche Diesel signs includes a multi-colored metal Agent sign depicting a red and yellow tractor on a blue background, as well as a single-sided illuminated Porsche Diesel Service sign with a translucent panel showing script and graphics set on a black background. Illumination of the Service sign is provided by an internal…

This single-sided illuminated BMW sign was acquired by the selling dealer circa 2021 in Europe and subsequently imported into the US. Subsequent work included retrofitting 120-volt LED illumination along with a replacement power cord and inline switch. The sign has a metal frame finished in white and a translucent embossed panel in black, white,…

This gas pump was built by Gilbert & Barker Manufacturing of West Springfield, Massachusetts, and is painted green and white with Sinclair branding. The dual-sided pump has been refurbished and is equipped with Dino Gasoline advertisement glass, three-function registers, a pump nozzle, and a rubber hose.

These folding Recaro seats are said to have been removed from a 1967 Porsche 911 and were recently acquired by the seller. The seats are upholstered in black leather and feature channeled pleats, chrome hardware, and side-mounted seatback release levers. These seats are now offered at no reserve in Palos Hills, Illinois.

This set of four 18" BBS center-lock racing wheels features a multi-spoke design, forged aluminum construction, and a polished finish with red BBS lip decals. The wheels were removed from a Porsche 996 race car and were acquired by the seller five years ago. The set is now offered at no reserve in Oak Lawn, Illinois.

This go-kart, constructed by F.W. & Associates to resemble a C3 Chevrolet Corvette, is powered by a replacement Honda OHV single paired with a centrifugal clutch, and the fiberglass body is mounted over a black tubular steel frame. Features include a rear band brake, faux tail and side lights, a steering wheel, white-painted 6″ wheels, and a…

This 409ci V8 engine was reportedly rebuilt under previous ownership and installed in a car for around 5,000 miles before the seller purchased the engine in 2017; it has been stored since. A video of the engine running on a test stand is included below, as are cylinder borescope views. An oil change was performed in preparation for the sale.

This Grand Prix pinball machine is a racing-themed arcade game that is one of approximately 10,554 examples produced by Williams Electronics Games of Chicago, Illinois. Features include a button to start gameplay, a multicolor-illuminated playfield, flippers, bumpers, and targets. The cabinet is outfitted with displays, double coin slots, and a…

These 15×9″ RS Watanabe Eight Spoke wheels were made by Racing Service Watanabe in Japan. The wheels were purchased by the seller circa 2011 and used on a Toyota AE86. They have a 4×114.3 bolt pattern with an eight-spoke design finished in silver accented by polished lips. Manufacturing marks are found on the outside and inside of the wheels,…

These 18″ Porsche Turbo hollow-spoke wheels were manufactured for Porsche by BBS and were removed from a 996 Turbo. The wheels measure 8” and 11” in width and feature alloy construction with hollow spokes. Acquired by the seller in February 2026, the wheels were subsequently refinished in silver.

This collection of signs consists of three gasoline and one Motor Club piece. The Chicago Motor Club sign is a double-sided, while the Union 76, Sinclair, and National Benzole signs are single-sided pieces. All four signs have a porcelain enamel finish and pre-drilled hanging provisions. These four signs are now offered at no reserve in Myrtle…

These 18” wheels were manufactured in 1995 and 1997 by Speedline in Italy and were said to be removed from a 1997 Porsche 993 Turbo. They feature three-piece construction and measure 8″ in width up front and 10″ in width out back. Production marks inside the wheels indicate part numbers, production dates, and other manufacturing information.

These five 15” Cromodora wheels measure 7.5” in width and were produced for use on Ferraris with center-lock hubs. The wheels are finished in silver, and are said to have been removed from a Daytona. All five wheels feature casting marks that include Ferrari and Cromodora branding. This set of Cromodora wheels was acquired by the seller in…

This illuminated Mercedes-Benz AMG sign features a translucent black composite face enclosed within a metal frame and measures approximately 25.5″ in diameter. Design details include an apple tree, engine components, and the company name. The single-sided sign is illuminated by internal LED fixtures using 120-volt wiring with a power cord and a…

This Black Cherry-finished Snap-on tool trolley was produced in collaboration with Harley-Davidson to commemorate the motorcycle company’s 95th anniversary in 1998. The seller tells us it is one of 3,000 made, and the rolling cabinet has lockable drawers, stainless-steel accents, and sketch-style graphics.

This scale model was assembled in the style of a 2026 Formula 1 Mercedes-AMG F1 W17 E Performance. The fiberglass bodywork is finished in a black livery with teal and silver accents. Features include front and rear wings, Pirelli-branded tires, a cockpit halo, and a faux top-mounted camera. The model was built in South America for the seller and…

This scale model was built in South America to resemble a Formula One car and is finished in a black and white Red Bull livery inspired by the 2026 cars. The model features front and rear wings, Pirelli-branded tires, a cockpit halo, and a multifunction steering wheel. This RB-style model is now offered at no reserve in Pompano Beach, Florida.

This coffee table was constructed using an F136 engine block sourced from a Ferrari 458, and the components were refinished in red and silver. Details include polished metal support brackets and an intake manifold passing through a central cutout in the glass tabletop. This Ferrari F136 V8 coffee table is now offered at no reserve in Diamond Bar,…

This single-sided reproduction illuminated Mercury sign features a prior version of the company’s logo in blue along with white script on a red background illuminated by red and blue neon. The sign is made of metal and measures approximately 61″ wide by 12″ tall. It is equipped with 120-volt circuitry, two pre-drilled removable mounting tabs…

These Recaro seats were reportedly removed from a 1994 Porsche 911 RS America and were most recently installed in a 1982 911SC. Acquired by the seller one year ago, the seats are upholstered in black cloth and feature power height adjustments. These Porsche RS America seats are now offered in Tucker, Georgia.