Kit Build/Review: Airfix 1/76 Panther #2

White Milliput zimmerit goes on to the hull.

On this second build of an Airfix 1/76 Panther I haven't bothered detailing the box contents or initial build. Instead I've just jumped in at the point where things get more interesting (to me, at any rate!), with detailing the kit. This is part of a current series of 'panzer wrecks' for the battlefields of my putative 20mm WWII wargaming collection.

Rear turret access hatch open.

Chipped zimm...

Zimmerit on the turret as well.

After applying the white Milliput zimmerit to the major areas, I decided to detail a number of other aspects of the kit. Mostly this meant opening a number of hatches; in addition to the easy commander's cupola hatch. In fact nearly all the crew hatches are open. I suspect they all baled out - and sharp-ish, as they haven't destroyed the tank, as per reg's - after hitting a mine and coming under fire once immobilised. The driver's vision hatch and the rear turret hatch (is this the 'loader's hatch'?) both required rather more effort! But I think the results are worth it. 

Both main turret hatches are open.

Driver's hatch also open, as are the two upper hull hatches.

Note different zimm' patterns on turret and hull.

Zooming in on the turret a bit.

Hull glacis up close.

Keen observers might spot that the turret and hull zimm' patterns are different. I've seen this often enough on photos of actual WWII German tanks. But I didn't follow specific reference. I also removed the turret lifting eyes and replaced them with bent stretched sprue, which I think looks a helluva lot better. In addition I scratch-built towing clevises (clevii???), a tow-cable, and added some tools and spare track.

Note missing rear road wheel.

I've scored the kit itself just two and a half 'kreuz this time. Maybe that's a bit harsh? But it is pretty poor. The tracks, for example, are so bad as to be unusable, f-f-f-frankly. Still, it does make a usable base kit for having fun like this with, albeit in the slightly smaller 1/76 scale, as opposed to my preferred 1/72.

Added details: tools, tow-cable, turret lifting eyes, etc.

Am I therefore wasting my time polishing a turd? Perhaps... I've even ordered several OKB Grigorov 1/72 resin Panther track sets. They look amazing online. I want the tracks on this to look nicer than is possible using the awful rubber band jobs that come with the kit. I also took the trouble to make sure the wheels went on without recourse to the oversized 'cap' type doodads that Airfix supply. 

I'm quite keen to add a jack and maybe a bucket at rear. And I may well add the rear stowage bins. Or perhaps jus one? And have the other 'missing in action', with no zimm' where it was... hmmm!?

Kit Build/Review: Revell 1/76 T-34/76, 1940

This is my second 'panzer wreck' build, after the FoV 1/72 Pz III. Only this time it's a Russian tank. It's  also 1/76, for starters, so smaller than my other 1/72 T-34s. But as a battlefield wreck? And a thing in itself? Well... whatever! As they say these days.  

Sprues... inc. ol' Matchbox diorama base.

And the rest.

Vinyl tracks... eugh!

Lacking internal detailing, other than teeth.

Didn't document much of this build.

Gorilla gel superglue sorts vinyl tracks.

Felt pen 'print' template on plastic card, for inner turret hatch detailing.

Added the gun breech, so the open hatch view isn't utterly bare.*

I've built it to look it took a hit or two, conked out and was abandoned. So apart from the shell penetrations and minor wear and tear, it's not in too bad shape. The surviving crew baled out, hence the open hatches, and someone's taken a few bits - the hull m.g. and two fuel tanks are missing - but it's mostly in pretty good shape. 

* Doubtless extending too far into the turret space, but I think it'll look better than empty space.

Hull MG has been removed. Commander's hatch open.

Missing rear mudguard and both fuel barrels, port side.

I did it in this manner on account of the model leading me this way. I thought about having the rear engine access hatch and the engine grill covers open as well. But that presented too any tricky challenges. I'd like to build a real humdinger of a wreck, but, ironically perhaps, a better base/donor kit would make that easier. 

I have a third model on this particular pending pile (I have terrible piles!), that I'd considered either doing as a wreck, or maybe even as a tank being built, which is an Airfix 1/76 Panther. I have the Nürnberg Panther factory book, and quite fancy doing a diorama of a hull under construction in a workshop. But I might entirely scratch-build that, and use the Airfix kit for a battlefield casualty.

Anyroad, re the T-34... TBC...

Kit Build/Review; 1/72 Forces of Valor Pz III ausf N

This is my second kit from this company (the first was a King Tiger), and I like it. I bought it 'cause I wanted to build a knocked out tank. So I had a look through several of my Panzer Wrecks titles. I was somewhat surprised how few Pz IIIs there are in the editions of the Panzer Wrecks series I happen to have.

The main bits.

Strange how they have the commander figure on the track sprue!

More bitzenbobz...

Very nice finely moulded running gear!

And the last bits, inc. instructaloids.

A contender for the most paltry decal sheet ever?

Prepping parts for the running gear.

So I wound up using images of Pz IVs, instead. The kit has schurzen, on both turret and body. I noticed many tanks lose their body armour, and yet retain the turret armour. Numerous wrecked Pz IV in the books I was referring to are in this state: schurzen up top, but not below. 

I also wanted to create battle damage, and this kit, quite chunky, presented some challenges in doing that. I also wanted numerous hatches open. Again, not always easy, with this kit. For example, the styrene behind the turret side hatches is very thick. So instead I had the schurzen open, instead. 

A combo of mine damage and a shell penetration ...

... have upset this side.

This side is mostly unscathed.

The wheels as supplied are mostly on two pairs of large strips, to make construction easier. Sometimes I would go with this type of arrangement. But in this instance I knew I wasn't going to go with it, for two reasons: first, the joining parts would be all too visible, and detract form the realism o' the resulting model; second, as a battle-damaged tank, I want the wheels all wobbly and out of alignment.

Turret cupola surgery.

The bulk is built.

Getting into detailing some battle damage.

The commander's hatch is designed to be open. But I didn't want to use the commander figure. The tank is going to be empty/abandoned. I sawed off the 'bucket' below the cupola. I also modelled the storage bin at the back of the turret open, and put some crew gear in it.

Battle damage wise, this tank drove over a mine, throwing off the track. Once immobilised, it's been hit low in the hull, rught where the mine blew up, more or less. There's a shell penetration in the lower forward hull, which has blow a return roller off, and some bent fenders and schurzen, and a few smaller caliber penetrations in the turret armour. The return roller that's been knocked out of position has also come apart, and some of the wheels near the point of the two impacts are knocked out of alignment.

Starting to add stowage.

Turret bin open...

Some growage of stowage. Plus opening turret schurzen.

Poor scribing this side.

Track sag.

Track sag is always a nice touch. but it's not always easy to achieve, and depends to quite a large degree on the type of track the kit uses. This kit has tracks of the better than average but won't glue with model glue variety. I had to glue them using Gorilla Glue superglue gel. The tracks are decent enough looking, detail wise. And I'm pleased with the overall effect.

Much more drastic track sag.

Adding some detail/interest to the rear engine deck.

I really want to start finishing some of my models. This one is intended to be a diorama. But hopefully also one I can still deploy on a wargame table, if desired. Most of my builds thus far have been with mid to late war stuff in mind. But this is finished in earlier war dark grey. I'm hoping I might learn to get better at single colour paint jobs. At present it's just blocked in. Weathering and shading are yet to be begun.

Started work on a base.

Halford's grey basecoat.

Revell dunkelgrau, decals, and a little blocking in of colours.

I don't think I'll be buying the Revell dunkelgrau spray can I used on this again. It took most of the rather small can to do this one model. And at about £5 a can, or thereabouts, that's simply too much. I don't know if I'll regret it, but I decided to put the decals on - using transfers from my spares box - at this stage. I'll work on shading and weathering over and around them, being careful not to obscure them altogether.

I'll end this post for now with a few more pics of the tank as she looks at close of play today. There's still a long ways to go. But at least I'm further on with her than with most models I post, where I more or less stop once construction is complete. I must get better at finishing stuff!

I'm quite pleased with progress so far.

Markings make such a difference!

The open hatches add some interest.

I like this view from the rear, with added suff, and open turret bin.

Just need to work on making the paint job more interesting!

To conclude, I really like the two Forces of Valor models I've built so far. They're less than half the price of certain other brands; Dragon, for example, have long been very expensive. But more recently, and rather depressingly, Revell kit prices at my local shop have gone up to similarly over-inflated levels. These FoV kits are, currently, cheaper than those hoary ol' Airfix 'vintage classics'!!! And they build into really quite good models, esp. with a bit of effort. It's a shame the range is, at present, really rather limited.